The most likely cause of mold in closets is dampness. This can be caused either by poor property maintenance where water begins to seep into the house through leaking roofs, broken gutters, cracked walls or perhaps dripping pipes or in the form of condensation. The latter is caused when the humidity in the atmosphere becomes too high. The moist air then comes into contact with a cold surface and converts back to water droplets thus forming condensation.

You Can Eradicate Mold From Your Closet Today

What should you do if you discover mold in your closet?

In most cases because closets tend to be enclosed spaces the biggest cause of damp and mold is lack of ventilation which can be resolved fairly easily. However there is work to be done first.

The first thing you should do is to remove everything from the closet. If it is clothing or linen etc. which has been

Mold In Closet

stored then laundering or cleaning these items is going to be essential. If there is mold present on the fabrics it will be necessary to remove this before it has a chance to spread further.

There are a few options open to you for removing mold stains from clothing lemon juice and salt mixed then applied to the stain and allowed to sun dry can be very effective. Another option is the use of bleach however you will be limited as to what you can apply this as it will remove colour etc. Moldergent is another option – this is a specially formulated laundry detergent and mold remover combined which is gentle even on sensitive skin.

Okay, so you have dealt with the contents of the closet now it is time to remove the mold from inside.

First safely has to be a top priority – remember exposure to some molds can have catastrophic effects on human health so before you begin seal the area off and wear rubber gloves, goggles and a face mask.

You Can Eradicate Mold From Your Closet Today

Again you have a choice of how you go about removing the mold of course natural products are far better for you and the environment so you may consider applying solutions of tea tree oil, grapefruit seed oil or vinegar all of which are excellent mold removers.

There are also commercial products available such as Molderizer which is 100% organic and completely non toxic and will also help remove the unpleasant odour. Molderizer whilst effective on its own can also be used as part of a mold removal kit which also contains a product called Safe Shield which acts as a protective coating thus preventing mold returning.

Which ever method you use the most vital part if the mold treatment is allowing the closet to dry out completely. Leave the doors open – open a window in the room or perhaps enlist the help of a dehumidifier but DO NOT return the contents until the area is 100% dry.

Creating adequate ventilation is going to be key in ensuring that the problem does not reappear. You could consider leaving the closet door open on occasion or perhaps installing a vent in the bottom of the door or the roof if it is a free standing closet.

You may consider purchasing a mini electric dehumidifier or using one which contains silicon crystals in the closet to soak up excess moisture (remember the crystals will have to be replaced regularly!) One final tip – NEVER put anything in the closet whilst it is damp for example jackets this will only add to your problem.

You Can Eradicate Mold From Your Closet Today

Good maintenance and good ventilation can prevent mold in closets and cupboards and could save you a small fortune in replacement clothes!

Black mold treatment must begin by finding the source of the problem. The fungus – correct name Stachybotrys chart arum or Stachybotrys atra will only flourish in damp conditions therefore it is essential that the source of the dampness is pinpointed. The usual cause is poor building maintenance – water is allowed to seep into the building from broken guttering, leaking roofs, dripping pipes or the atmosphere in the building contains excess humidity which in turn creates condensation.

Black Mold Growth

Once the cause of the dampness has been put right the damage can be accessed and the black mold treatment can begin.

Order Your Mold Cleaning Kit Today And Receive A FREE Ebook And Podcast

If you are fortunate enough to have only a small area affected by the mold you should be able to carry out the mold treatment yourself. If the damage is extensive the only option really is to call in professionals in mold remediation. The reason for this is that by exposing yourself to large amounts of mold without the proper equipment and protective gear you really are asking for trouble. Exposure like this can lead to major health issues which may include – skin rashes, vomiting, diarrhoea, breathing problems and then there is the possibility it could kill you! So please play safe.

Before tackling the black mold treatment even on a small area it is essential that you are kitted out with disposable gloves, a respiratory mask and eye protection. You must ensure you have as little contact with the mold as possible.

There are a number of things you can use to treat the mold, however the last thing you want is toxic chemicals – let’s face it the mold is toxic enough on its own!

Here are a few examples of black mold treatments you can try:-

Vinegar – Cheap and plentiful and a great way to remove mold. Simply spray on to the affected area, leave for a while then wipe with a damp cloth. The only real problem with this black mold treatment is the pungent odour from the vinegar.

Tea Tree Oil – A solution of water and a few drops of tea tree oil in a spray bottle, again spray the affected area and leave to sit. Again this treatment can be a bit smelly and also quite expensive but a little tea tree oil goes a long way. The solution you make up will also stay good for an indefinite period of time so it can be re-used over and over again.

Grapefruit Seed Oil – this is used in the same way as tea tree oil. Make a solution in a spray bottle and apply to the black mold and allow to dry. Like the tea tree oil, grapefruit seed oil is expensive but it too goes a long way. The huge advantage here is that it is completely odourless.

Mold Treatment Kits – These are available commercially. One which comes recommended contains two products, both of which are 100% organic and completely safe for use around children and animals. The first is called Molderizer which is an extremely effective black mold treatment and can be applied to virtually any type of surface. The second product is called Safe Shield – an excellent black mold treatment in its own right but this will form a protective layer on the surface to which it is applied preventing mold from re-occurring in future.

Order Your Mold Cleaning Kit Today And Receive A FREE Ebook And Podcast

You will notice that all of these black mold treatments involve spraying the mold with product this is because it is vital that dry mold spores are not allowed to escape into the atmosphere. With this in mind do not be tempted to brush or in anyway remove dry mold. This too will have detrimental effects on your health and others that of others sharing the same building.

The next step is to again allow the area to dry out completely, this is important to prevent mold returning> So, open windows, turn on heating or use a dehumidifier- remember mold is a living organism and need moisture to flourish remove the moisture and it cannot survive.

Here’s to success in your black mold treatment!

Once the mold has formed as with any living organism it needs food to survive and this is when the potential for the black mold to cause symptoms of illness in humans begins. The  cause of the symptoms are due to something known as VOC’s – Volatile Organic Compounds – these are produced by the mold when it begins to break down the surface on which it is present in order to get the nourishment it needs for continued growth.
Anyone exposed to high levels of these VOC’s can experience any of a number of symptoms attributed to the black mold growth.

Listed below are some of the most common symptoms of black mold induced illness:

1. Respiratory problems

2. coughs

3.nausea

4. Rashes on the skin

5. Loss of memory

6. Dizziness

7. Problems with blood pressure

8. Asthma

9. Urinary tract infection

10. Damage to the lungs

11. Allergies – itchy or running nose, eyes etc.

12. Difficulty concentrating

These are just a few but as you can see the symptoms caused by black mold are varied and can be potentially very serious especially those affecting the respiratory and central nervous systems.

Obviously if you find yourself suffering from any of these symptoms it is best to consult a doctor. However the best way to ease or eradicate your symptoms caused by black mold is to eliminate the mold from your home.

Click Here To Purchase Your Mold Cleaning Kit

As I have said before black mold needs moisture to grow and the moisture within our homes can usually be caused by one of two things high humidity or dampness.

High humidity is excess moisture in the atmosphere. The number one cause of this is lack of ventilation. As we go about our daily tasks we generate steam through cooking, bathing, perhaps using a tumble dryer to dry clothing, We hang wet clothing to dry around heaters – the list is endless. However without enough ventilation the moisture in the atmosphere builds because it cannot escape, then as it cools moisture begins to settle on cold surfaces as water droplets better know as condensation. The wet surfaces such as window frames, walls etc. then become prime growing areas for black mold.

Dampness is usually caused by an underlying problem with water leakage. Poor property maintenance can lead to water seeping in through roofs, into basements, through cracks in walls or from leaking pipes. A constant drip will over

Damp Area On Walls

time cause a huge amount of damage and the damp surfaces create ideal growing conditions for black mold.

The first step to getting rid of back mold and the symptoms it can inflict is to identify what the root cause is.

If your property has a problem high humidity then it is fairly easy to put right. Simply open a few windows! This is the simplest and cheapest solution but possible not the best one if the temperature outside is -10oC. However there are other relatively cheap things you can do, for example:-

1. Have extractor fans installed in your kitchen and bathroom which are directly vented to the outside of the building – NOT into attic space or basements, do that and you will have BIG problems in the future.

2. If you use a tumble dryer this too should have a vent to the outside of the house. These things create massive amounts of steam so by doing this alone you will cut the humidity levels greatly.

3. Try not to dry wet clothing in the house – where possible hang it outside to dry. If you must dry it inside hang it in an unheated room, open the window and close the door.

4. Dehumidifiers are a great tool in solving this problem too. They may not be particularly cheap to buy but if you have a problem then they are well worth the investment. A dehumidifier will draw the air in through a vent remove the moisture and blow the dry air back out and you empty the container of water! Obviously this is a very simplified description of how it works but believe me it works! You may wonder about the cost of running one of these units, well it really is not that expensive especially if you purchase a model which has a humidistat fitted. This means it will switch itself on and off as required rather than running constantly. Another point to consider is that dry air is far easier to heat than moist air so you should be able to cut down on your winter heating bill!

If the cause of your black mold is dampness, it may not be so easy to remedy.

1. The first thing to do is to establish why you have damp areas in the first place – if necessary you should bring in a professional builder or plumber to assess the situation. You cannot begin to eradicate the black mold and the symptoms of ill health it causes until repairs are completed.

2. If the damage is extensive it may be necessary to replace wood, plaster, carpets etc. If this is not the case the next step is to dry the area out remember – remove the moisture and the black mold cannot grow or spread. Opening windows in good weather will do the job as will the use of heaters. A dehumidifier is once again the ideal piece of kit. It will do the job much faster than heaters or open windows and many models have the added advantage of having air filters which may help remove any mold spores in the atmosphere.

The Black Mold Clean Up;-

The task of cleaning any signs of black mold need not be an expensive one. However, it should be a non toxic one.

There are many natural ways to clean black mold from good old soap and water to solutions of tea tree oil or grapefruit seed oil. However there is a commercial mold cleaning kit which comes highly recommended. The name – MOLDERIZER. This product is 100% organic so there are no harsh, toxic chemicals. It is safe to use on virtually any surface from walls and wood to carpets and rugs and will cause no harm to children or pets. It will remove black mold stains quickly and easily. The second part of the mold cleaning kit is called SAFE SHIELD. When applied after cleaning with Molderizer it acts as a barrier and will prevent mold from growing in the same area again.

Click Here To Purchase Your Mold Cleaning Kit



The growth of mold can be due to a number of reasons. Probably most commonly to high levels on moisture in the atmosphere. In summer this is often due to high humidity levels and in winter due to inadequate ventilation as we try to keep our homes heated. This can cause condensation on windows and other cold surfaces as the air cools and the moisture turns to water droplets. Of course moisture is exactly what mold needs to germinate and flourish.

A Bad Case Of Mold Growth

In this scenario it is fairly easy to remedy – remove the moisture for the atmosphere and use a good mold cleaner to remove and kill the mold and your problem should go away.

Purchase A Mold Cleaner Kit And Get A Free Information Ebook and Pod Cast

How do you reduce the moisture in the air?

Something as simple as opening a window to let air circulate will help, you could purchase a dehumidifier which will greatly reduce the moisture and will dry out any particularly damp rooms. These are not too expensive to run especially if you purchase a model which has a humidistat fitted which means it will only switch itself on when the humidity level rises. Another feature which is useful is that some models have various types of air filters which will help to remove mold spores from circulating in the atmosphere.

Fitting a ventilation fan in the bathroom which is vented directly to the outside of your property is a good plan for use during bathing. A cooker hood fitted in the kitchen will extract excess moisture and steam created during cooking. Tumble driers create huge amounts of moisture so make sure that this too is ventilated to the outside of your house.

All of these simple measures are extremely effective and not hugely expensive.

Good maintenance to the fabric of your property is also vital. Taking care of small problems as they arise can prevent major cost and major repairs in the future. Check for leaky pipes, blocked gutters, damaged brick work etc. all of these will allow water to seep into your home damaging walls and floors as well as furniture and soft furnishings – creating a mold growing haven.

Once you have dealt with the source of your mold problem it is time to tackle the mold with a good mold cleaner.

If you venture into your local store or on to the internet you will be faced with a myriad of mold cleaner products all claiming to be the best. Beware, many of these are toxic containing all sorts of chemical agents which can do as much if not more damage to your health and that of your family if not used with extreme care.

The good news is, that there are now natural mold cleaners out there which contain nothing but natural ingredients but which are equally as effective as the chemical products available. One such product is Molderiser. This  powerful mold cleaner was previously only available in industry but it has now been adapted for home use. It is 100% natural and extremely safe to use in homes where there are children and pets. It can also be used on virtually all types of surface. When used in conjunction with Safe Shield which acts as a barrier and will prevent mold returning you can be sure of great results. Both of these products can be bought together as part of a kit.

Purchase A Mold Cleaner Kit And Get A Free Information Ebook and Pod Cast

If you don’t want to spend any extra money there are a couple of every day ingredients which will act as great mold cleaners which you will likely have in a cupboard.

Soap – Plain old soap will do a perfectly good job if the mold infestation is fairly minor. It is a simple as scrubbing the affected area, wiping it clean then allowing to dry.

Baking Soda – This is a very simple but effective and cheap mold cleaner for tiles. Mix the baking soda into a paste with water and vinegar. Use a toothbrush to scrub with the paste. Leave this to sit for around twenty minutes then rinse off.

This is just a couple of suggestions for natural mold cleaners, you could also try tea tree oil or grapefruit seed oil – these are quite expensive but a little bottle goes a long way! Plain distilled white vinegar will also work well.

Caution: If you are unsure of the type of mold in your home please consult a professional – it may be toxic!

Purchase A Mold Cleaner Kit And Get A Free Information Ebook and Pod Cast

Chemical mold removers can be very effective but should only be used with great care especially around children and pets and probably only by professionals. Hiring such contractors can seriously damage your bank balance!

Purchase A Mold Remover Kit And Get A Free Information Ebook and Pod Cast

However, there are other options – natural mold removers which will kill mold just as effectively but without the health hazards associated with commercial mold removing chemicals.

Here are four tried and tested natural mold removers:

Tea Tree Oil which you can purchase at health food stores does a fantastic job as a mold remover. It is expensive but you only have to use small amounts to get great results. It can be used on walls, ceilings, shower curtains etc. Be aware that it does have a very strong odour which will take a few days to calm down – at least it’s better than a musty moldy smell! Tea Tree Oil appears to remove and kill the vast majority of mold types.

First thing to do is mix 2 teaspoons of the tea tree oil with approximately 2 cups of water in a spray bottle. Shake gently to mix the two then spray the areas of mold with the solution. There is no need to rinse the mixture off simply leave to dry. You can keep the mixture ready for next time!

Vinegar – something which virtually every household will have in a kitchen cupboard and it is inexpensive. White distilled vinegar poured into a spray bottle and sprayed directly onto the area of mold will kill around 82% of molds according to reports. Again don’t rinse, allow to dry. This one is particularly smelly but still a good mold remover!

Grapefruit Seed Extract – the one huge advantage which this mold remover has is that it is completely odourless. However like the tea tree oil it is expensive but again only small amounts are required. Simply put 20 drops of the grapefruit extract into a spray bottle with two cups of water and shake to mix. Again spray the affected area, no rinsing is required just allow to dry. This mixture too can be kept indefinitely.

4. There are of course commercially available natural mold removers and killers. One of which is Molderizer which is 100% organic and completely safe for use around pets and children. This product works by changing the DNA make up of the mold which kills it and when used in conjunction with Safe Shield which acts as a barrier to prevent its return the results are fantastic.  Both products can be bought together as part of a mold remover kit.

Purchase A Mold Remover Kit And Get A Free Information Ebook and Pod Cast

Of course, these mold removers are all well and good but the best way to cure mold is to prevent it.

Good property maintenance is essential. Take care of any remedial work regarding plumbing, and the fabric of the building immediately before a small problem becomes a large and expensive one to fix.

Problems with humidity in the home can be remedied fairly easily by improving the ventilation in your home. Open windows, fit a ventilation fan in the bathroom, fit a cooker hood in the kitchen. (both of these should be vented directly outside.) Invest in a dehumidifier which will greatly help to reduce humidity and condensation – Keeping humidity below 55% will prevent mild growth. Many dehumidifiers also come with various air filters which will help to remove mold spores from the atmosphere.

Caution: If you are at all unsure of the type of mold you have growing in your home please seek professional advise – it may be toxic!

Purchase A Mold Remover Kit And Get A Free Information Ebook and Pod Cast

Mold Growth On Wall

Purchase A Mold Treatment Kit And Get A Free Information Ebook and Pod Cast

Mold will also attack carpets, rugs, shower curtains, walls and ceilings – the actual fabric of your home. It is important to remember that mold and mildew spores are very hardy and can stay in a dormant state for long periods until the moisture level in the you home rises to a sufficient level for them to begin to grow. Not only will it cause unsightly blackish stains and a horrid musty odour but if no mold treatment is applied it will literally destroy your fabrics as it eats into them.

The best mold treatment is no treatment it is prevention! Here are some tips which may help.

1. Good housekeeping is a good place to start, dirt and grim provide mold with the food the need to grow and multiply.

2. Use wax as a barrier on leather items. This will stop moisture and therefore protect against mold. Alternatively there are sprays available.

3. Don’t leave dirty, wet clothing lying around – put them in the laundry basket!

Allow Shower Curtain To Dry

4. Open out your shower curtain and allow it to dry.

5. If you have a problem with moisture in closets etc. storing clothing along with moisture inhibitors to prevent mildew is a good idea. If the weather is favourable, air your clothes outside in the sunshine if possible.

6. Ventilation should be a priority to keep air circulating. Open windows, switch on an electric fan. Stagnant, moist air is heaven for mold!

7. Leave your closet doors open now and then to let air circulate and remember NOT to put clothes which are not completely dry in the closet.

8. Lastly but very importantly dry out the areas of dampness or excess moisture which is accumulated through normal daily routine or through leaks etc. Any problems should be repaired and then remove the moisture either with a dehumidifier, absorbent silica or something similar or simply by heating and opening windows.

Mold treatment for different types of materials will vary. Here are a few tips for mold treatment.

Fabrics and Clothes:

The most important thing is that you start mold treatment as soon as you discover the problem. The first thing to do is brush the item to remove as much of the mold as possible – Remember to do this outside so as not so allow mold spores to spread throughout the house. Launder the item using detergent and if possible allow to dry outside in the sunshine.

There are specially designed detergents for this purpose one of these is called Molergent , this is a combined mold treatment and laundry detergent.  Not only will it clean your clothing like a convensional laundry detergent but it will kill any mold and remove the stains too. The best part is that it will not irritate sensitive skin and it is 100% organic!

There are other alternatives such as the use of lemon juice and salt which is applied to the item and left to sun dry. Chlorine bleach is another option. Dilute 2 tablespoons in a quart of warm water and leave the stain to soak for between 5 and 15 minutes, then rise and allow to dry. The big problem with using bleach is that it definitely cannot be used on wool or silk items and it can remove the colour from items also so caution should be taken if using this option.

Make Clothes Fresh And Mold Free With Moldergent

Carpets, Rugs, Upholstery and Mattresses.

Mold treatment in soft furnishings can be a real pain in the neck. There are a few options open to you but the first step is the same no matter what the item is. Remove the item from the house and brush loose mold off, then vacuum up as much as possible. The next step is to dry the item out preferably outside in the sun but if this is not possible you could use a heater or perhaps a dehumidifier.

In the case of mattresses and upholstery the mold treatment is usually to use a cloth soaked in an alcohol solution used to wipe the mold infected area then dry out properly. If you have a mattress or chair etc. which is particularly bad the only real method of mold treatment is fumigation.

For carpets and rugs you could try using a carpet shampooing machine or a detergent and damp cloth.

There is one detergent that you can use on all of these items called Molderizer – a 100% organic product it works by changing the DNA make up of the mold. It is also completely safe to use in homes where children and pets are in residence.

Purchase A Mold Treatment Kit And Get A Free Information Ebook and Pod Cast

Wood.

Where you have wood which has not been treated or painted you will have a greater risk of mold and mildew forming if the surface becomes wet or damp. Painting with enamel or oil resin paints usually keeps wood resistant.

Mold treatment for wood involves scrubbing the area down with something like washing soda or an organic detergent like Molderizer. It is important that the area is dried out as quickly as possible and then painted  or sprayed with a protective substance like one called Safe Shield which will act as a barrier and will prevent mold spores germinating in the same area in future, combined these products are extermely effective. They can be purchased as a mold treatment kit.

Caution: If you are unsure of the type of mold in your house please consult a professional – it may be toxic.

Purchase A Mold Treatment Kit And Get A Free Information Ebook and Pod Cast

The question I suspect that you are looking to answer by visiting this page is – How do I kill mold?

Extreme Case Of Mold Growth

The answer is actually fairly simple. The use of household bleach or disinfectant can be enough to wipe out whole colonies of mold. However, a far more effective way to kill mold is to use a non toxic detergent which is designed to kill mold and mildew. Any area of wall or ceiling which is badly affected is best removed completely and replaced.

However, there is really only one way to kill mold in your home for good – remove the source of moisture which is allowing it to multiply and flourish.

Purchase A Kit To Kill Mold And Get A Free Information Ebook and PodCast

It may be that it is simply a question of reducing the amount of moisture in the atmosphere by increasing ventilation especially in rooms where a lot of steam is generated like the kitchen and bathroom. This can be achieved by having ventilation fans and cooker hoods installed which are vented directly to the outside of your home – NOT to the attic or basement as you will just end up with additional problems with condensation and mold in the future. Another good way to reduce the humidity in your home is using a dehumidifier these are fairly inexpensive to run especially if you purchase one which has a humidistat. Many models also come with various air filters which can help in removing impurities and mold spores from the atmosphere. These simple measures can make a huge difference and coupled with the cleaning process you will kill mold in your home.

None of these measures however, will have any great effect if there is a bigger problem with water seeping into your home from an unknown source . Cracked outer walls, blocked gutters, water in the foundations, dripping pipes. These are all things which will give mold a constant source of moisture and never allow mold affected areas of your home to dry out properly. If you suspect that you have water infiltrating your home it would be wise to get a builder or plumber to check out all possibilities and carry out any work immediately before the mold spreads and begins to seriously affect the health of you and your family.

Purchase A Kit To Kill Mold And Get A Free Information Ebook and PodCast

One very important point to remember is that once the source of your problem has been identified and action taken to kill the mold you must take safety precautions when cleaning up. Ensure that you wear gloves, a face mask and goggles.

It may seem a but extreme but it is important that you seal each room before you begin so that mold spores cannot migrate to other rooms. Also, you must either use a vacuum cleaner to suck up any dried mold dust or damp the area down with water before beginning to wipe. Mold has a tenancy to give off toxic dust damping down will help prevent this. Also make sure that if you use your vacuum cleaner that you empty it immediately – do it outside NOT in the house and keep your protective clothing on.
All of this may take time and a bit of money but to kill mold once and for all must be better than carrying out the yearly ritual of cleaning the same areas over and over.

Products like 100% organic Molderizer will kill mold without using toxic chemicals by changing the DNA make up of the mold and Safe Shield – also 100% organic which will not only kill and clean mold and mildew but also acts as a barrier and will prevent mold spores germinating on the same  surfaces  future.  You can buy both these products as a mold killing kit, by using them in tandom you will achieve lasting results!

IMPORTANT: If you are unsure of the type of mold in your property before you begin a DIY clean up get it checked out by a professional – it may be toxic!

Purchase A Kit To Kill Mold And Get A Free Information Ebook and PodCast

]]> http://housemoldtreatment.com/how-to-kill-mold-once-and-for-all-time/feed 0 http://housemoldtreatment.com/how-to-clean-mold-and-prevent-its-return http://housemoldtreatment.com/how-to-clean-mold-and-prevent-its-return#comments Thu, 07 Jan 2010 14:30:54 +0000 admin http://housemoldtreatment.com/?p=27 In order for mold to flourish like every other living thing it requires food and moisture.

The most common type of mold to be found in homes is black mold or mildew. Whilst this is not as harmful to health as other strains of mold it is still not something you want multiplying in your home – and this stuff does spread quickly!

Purchase A Mold Cleaning Kit And Get A Free Information Ebook and PodCast

So how do you clean mold? Well, before you can begin cleaning mold there are a few things you should do: -

1. It is important that if you find a patch of mold on a window frame or wall like you immediately check all other areas of your home for similar discoloration and growth.

2.Where ever the mold is discovered it is vital that you establish the cause. Check basements, loft space, outer walls,

A Gutter In Need Of Attention

gutters anywhere that there may be a problem with water seeping in and causing the wet or damp conditions required for mold to grow.

3. Whatever the cause is take immediate action to have it fixed! Good property maintenance is the key to avoiding such problems.

4. If there is no apparent cause there is a strong possibility that it is purely down to condensation. This occurs when there is not adequate ventilation in your home and the humidity rises. As the temperature cools the water vapour settles on cold surfaces such as windows etc. making them wet with condensation which will also affect the wooden frame and once again give mold the ideal conditions to grow and spread.

This can be remedied by ensuring that there is enough ventilation especially in bathrooms and kitchens where lots of steam can be created and by making sure that appliances such as clothes driers have a vent directly to the outside of your home.

5. Dry the affected area out properly – mold cannot grow if moisture is not present so try to dry the area out fairly quickly. A dehumidifier can be invaluable for this task.

Purchase A Mold Cleaning Kit And Get A Free Information Ebook and PodCast

Okay, so now you have hopefully removed the source of the problem how to clean mold is the next step.

For safety it is best if you wear some protective clothing such as goggles, rubber gloves and a face mask. Also it is a good idea to seal off the area in which you are going to work to prevent any mold spores invading other rooms of the house..

Many people would be tempted to use bleach to clean mold and mildew, however to be honest although it will work it may not prevent the return of mold patches.  Another major disadvantage to using bleach is that it can also cause more damage to surfaces and floor coverings if drips fall onto them.

Use a wire brush or a vacuum cleaner for larger areas to remove any of the surface mold and dust which it likes to feed on – this is especially good on wood – then wash the area down with an organic mold cleaning product such as Molderiser which will remove the mold stains and help to neutralise any “musty” odours.

The same can be done for walls and ceilings however, this will depend on how bad the problem is. It may be the case that cleaning with a 100% organic product Molderiser or any other cleaning product will not be enough and that the plaster board may need ripping out and replacing.

Once you have removed the mold there are products available which will help to act as a barrier and prevent the mold from reforming on surfaces one such product which is also completely organic is Safe Shield which when used in conjunction with Molderizer will eliminate unsightly stains and prevent them returning. These products are available in a mold cleaning kit , give them a try for fantastic results!

If you are unfortunate enough to have problems with mold in closets where it also attacks clothing try Moldergent which is a laundry detergent with a built in mold remover. It is 100% organic and specially formulated to make it suitable for sensitive skin.

Purchase A Mold Cleaning Kit And Get A Free Information Ebook and PodCast

Caution: If you are unsure which type of mold you ahve in your home please consult a professional – it may be toxic.